LFY-658 Carpet 4 5° Method Burning Performance Tester
The main purpose
This standard specifies the test method and evaluation of the burning performance of carpet samples placed at a 45° angle under the control of the laboratory under the action of flame. Suitable for carpets with various fiber components and organizational structures.
principle
Under the specified test conditions, ignite the surface of a carpet sample placed at an angle of 45° for a certain period of time, and measure the continuation time, smoldering time and damage length of the sample.
Instrument characteristics
The combustion box of the 45°combustion tester is made of stainless steel. The box should be equipped with a glass observation window. The top of the box is equipped with a smoke exhaust port. There is a row of ventilation holes at the bottom of both sides. The box is equipped with sample holders. The frame device is at 45° from the horizontal position. The test box consists of an ignition timing device, an ignition device and a safety control system.
Technical index
1. The inlet pressure of the burner is 3.92kPa (400mmH2O), and the flame height is adjusted to 24mm
2. Ignition timing range: (0-99.99)±0.1s, pre-settable
3. The burner consists of a combustion tube, a gas nozzle and a flame stabilizer
4. Steel ruler: the graduation value is 1mm
5. Fuel used: Gas source: butane gas or liquefied petroleum gas
6. The test frame is composed of a pressure frame and a bottom plate. The outer dimension of the pressure frame is 400mm long × 220mm wide, and the inner dimension is 360mm long × 180mm wide; the size of the bottom plate is 485mm long × 220mm wide
7. Sample size: length 400mm×width 220mm; 3 pieces each in vertical and horizontal directions.
8. Power supply: AC220v; 50Hz.
Applicable standards
GB/T 14768-2015 Carpet burning performance 45° test method and evaluation
This standard specifies the test method and evaluation of the burning performance of carpet samples placed at a 45° angle under the control of the laboratory under the action of flame. Suitable for carpets with various fiber components and organizational structures.
principle
Under the specified test conditions, ignite the surface of a carpet sample placed at an angle of 45° for a certain period of time, and measure the continuation time, smoldering time and damage length of the sample.
Instrument characteristics
The combustion box of the 45°combustion tester is made of stainless steel. The box should be equipped with a glass observation window. The top of the box is equipped with a smoke exhaust port. There is a row of ventilation holes at the bottom of both sides. The box is equipped with sample holders. The frame device is at 45° from the horizontal position. The test box consists of an ignition timing device, an ignition device and a safety control system.
Technical index
1. The inlet pressure of the burner is 3.92kPa (400mmH2O), and the flame height is adjusted to 24mm
2. Ignition timing range: (0-99.99)±0.1s, pre-settable
3. The burner consists of a combustion tube, a gas nozzle and a flame stabilizer
4. Steel ruler: the graduation value is 1mm
5. Fuel used: Gas source: butane gas or liquefied petroleum gas
6. The test frame is composed of a pressure frame and a bottom plate. The outer dimension of the pressure frame is 400mm long × 220mm wide, and the inner dimension is 360mm long × 180mm wide; the size of the bottom plate is 485mm long × 220mm wide
7. Sample size: length 400mm×width 220mm; 3 pieces each in vertical and horizontal directions.
8. Power supply: AC220v; 50Hz.
Applicable standards
GB/T 14768-2015 Carpet burning performance 45° test method and evaluation