LFY-702 Abrasion Resistance Tester for Overhead Insulated Cable
The main purpose
It is suitable for the determination of the wear resistance of overhead insulated cables.
Instrument characteristics
1. The instrument adopts a special friction device for uniform friction, three-station test, and the friction times are automatically recorded. Through the test, the maximum, minimum and average values of the wear resistance of the tested sample can be displayed.
2. The instrument is highly automated and easy to operate.
Technical index
1. Motor speed: (8±0.5) r/min;
2. Rotor diameter: Ф120mm
3. Weight: Nominal cross-section of conductor ≧16mm2, 50N;
Nominal cross-section of conductor<16mm2, 30N;
4. Sample size: single core sample length 75cm;
5. Number of test stations: three stations;
6. The applied voltage of the conductor and the test device: 24V;
7. Power supply voltage 220V 50Hz
Applicable standards
GB/T 12527-2008 Overhead insulated cables with rated voltages of 1KV and below Appendix B
Previous:LFY-641 single wire and cable vertical burning tester
Next:nothing